Pure Fiber-Optic USB Cable

Model Number

M2-1xx

Description

This USB model uses pure fiber-optic cables and plug an AC/DC power adaptor into the downstream module. M2-10x having A plug to A receptacle is the basic model and is applicable with adaptors for A plug to B plug and with an integral hub for multiple ports.

Opticis optical extension cables link the USB signal up to 150feet (45 meters) without any repeater.
They provide the simplest way to link the USB device far from the host. Owing to the advanced VCSEL and PD, USB protocol could be maintained over such a long-distance connection with cost effective. The modules have a pair of an optical-to-electrical and an electrical-to-optical converters at each end, connected by 2 stranded fiber-optic cables.

Opticis optical extension cables provide A plug-in to A receptacle (M2-100). In addition, hybrid fiber cables running electrical wire along are used instead only optical cables. This offers convenient extension where there is no AC power supply, adjacent at the end of devices to be supplied to USB devices and Opticis downstream modules. The model named as M2-210 supplies DC power, running through copper wire in the hybrid cables, from the host end to the downstream module as well as to USB devices.

Features

• Extend the USB signal up to 150feet (45 meters)
  
• No software to install: Easy to use; plug and play.
  
• Compatible with USB 1.1(12Mbps, 1.5Mbps)
  
• Cables are light-weight, almost zero EMI/RFI emissions, no spark hazard and data secure Wide variety models: DC power supply along cable to Rx module and Integral hub for ultiple ports to be designed in by customer's inquiry

• PC link of peripherals in factory & office
  
• USB camera interfaces for surveillance system
  
• USB interface of automatic motion controls
  
• PC interface of digital audio systems